Olight Custom 18650 3.6V 3500mAh HDC 10A Protected Rechargeable Li-ion Battery ORB-186C35

This Olight HDC customised 10A 3.6 V 3500 mAh 18650 battery is designed specifically for the Olight Baton Pro, Perun & Warrior Mini as it has a high discharge current of 10A, in order to access the high lumen outputs.

Only the customised battery will charge inside the Olight Baton Pro and Perun. This is due to the customised batteries featuring a positive and negative terminal at one end of the battery.

Features:

• Optimal for high-drain devices
• Using an innovational positive protection circuit and its positions on the positive of battery which is different from traditional circuit protecting board placement
• Over discharge current protection
• Over discharge voltage protection
• Short circuit protection
• Overcharge protection
• Up to 500 charge and discharge cycles
• Maximum 10A constant discharging current
• Improved Battery Safety Free from Leakage of Liquid Electrolyte
• Low Battery Internal Impedance
• Size: Custom 18650
• Compatible with Olight Perun, Olight Baton Pro or Olight Warrior Mini
• Chemistry: Li-ion / Lithium Ion
• Maximum Capacity: 3500mAh
• Nominal Voltage: 3.6V (Will be 4.2V once full charge)
• Maximum Discharge Current: 10A
• Charging Current: 1800mA (0.5C)
• Charging Cycle: 500 Times
• Weight: 50g
• Dimension: Diameter 18.5 ± 0.1mm; Length 69.8 ± 0.5mm
• Important: NOT COMPATIBLE WITH OTHER FLASHLIGHTS AND IT'S NOT SAME WITH REGULAR 18650 LI-ION BATTERY.

Package Includes:

• 1 x Olight Custom 18650 3.6V 3500mAh HDC Protected Rechargeable Li-ion Battery ORB-186C35

Warranty : 1 year warranty from the date of purchase. Overdischarging or battery leakage is not covered nor is fast draining of battery while using. Please keep the voltage of all Li-Ion batteries above 3.8V for healthy storage. Recharge as soon as possible when you have run them down. Storing a depleted ( less than 3.2V open voltage ) battery may damage/ shorten life/cycle permanently.